Gree · Heat pump

CP More than one master wired controller

Low severity Gree GMV6 Mini VRF

What the control is telling you

More than one wired controller on the H1/H2 bus is configured as the main one.

Applies to: Gree GMV6 Ultra Heat Mini VRF 36-60k (GMV-V..WL/C-T(U))

Likely causes

  • Controller address setting

Test and repair steps

  1. Set only one wired controller as master.

Models that show this code

3 models in Gree GMV6 Mini VRF

GMV-V36WL/C-T(U)GMV-V48WL/C-T(U)GMV-V60WL/C-T(U)

Other codes on the same units

  • U6 Service valves not opened
  • AU Remote emergency stop
  • Ab Emergency stop
  • CH Indoor capacity too high
  • CL Indoor capacity too low
  • Ed Drive IPM low temperature protection
  • FP Outdoor DC fan motor fault
  • HA Fan drive memory chip fault

Save it for the next call

Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.

Open the app

Source: Gree GMV6 Ultra Heat Mini VRF 36-60k (GMV-V36-48-60WL-C-T(U)) service.pdf - section Chapter 3 Faults, 4.1 Error Indication. Summarized in our own words; check the original manual for your model.

Homeowner looking at this code? See what it means for you and when to call a technician.

For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.