HVACopedia

Gree · Heat pump

bH System clock abnormal

Low severity Gree GMV6 Mini VRF

What the control is telling you

The board clock is wrong.

Applies to: Gree GMV6 Ultra Heat Mini VRF 36-60k (GMV-V..WL/C-T(U))

Likely causes

  • Clock not set
  • Board fault

Test and repair steps

  1. Set the clock from the wired controller or service tool.
  2. Replace the outdoor control board if it will not hold.

Models that show this code

3 models in Gree GMV6 Mini VRF

GMV-V36WL/C-T(U)GMV-V48WL/C-T(U)GMV-V60WL/C-T(U)

Other codes on the same units

  • PJ Inverter compressor failed to start
  • PL DC bus voltage too low
  • PP Inverter compressor AC current protection
  • UE Refrigerant charging invalid
  • bJ High and low pressure sensors swapped
  • bd Sub-cooler gas inlet sensor open or shorted (20K)
  • dC Indoor capacity DIP setting wrong
  • dH Wired controller board fault

Save it for the next call

Star this code in the HVACopedia app and keep the whole library on your phone for jobs with no signal.

Open the app

Source: Gree GMV6 Ultra Heat Mini VRF 36-60k (GMV-V36-48-60WL-C-T(U)) service.pdf - section Chapter 3 Faults, 4.1 Error Indication. Summarized in our own words; check the original manual for your model.

Homeowner looking at this code? See what it means for you and when to call a technician.

For licensed technicians. Gas, electrical and refrigerant work must be done by a qualified, licensed person. Shut off power and gas before servicing, never bypass a safety control, and follow the manufacturer’s manual for the exact model; it and local codes always take priority. HVACopedia is not affiliated with any manufacturer; brand and model names only identify the equipment.